LPI's downloadable Industrial Pump Literature is listed below. The brochures contain general information on the design and capabilities of our products and the industries they serve.

The documents on this site are all in the Adobe Acrobat Reader PDF format. You will need Adobe Acrobat Reader in order to view and print the brochures. A free version of Acrobat can be downloaded from Adobe's website.

FLS-6000 Slurry Pumps
For the Refining, Synfuels, Mineral Processing Industries With hard metal internals the FLS-6000 pump will outlast coated pumps by four to one. Wear does not compromise the outer pressure casing.

PDF File 564kb

Series 6000
Low Flow High Head Partial Emission Pumps For high temperature low flow slurry applications. API single stage, overhung slurry pumps that can reliably operate at heads up to 275 meters without gears or VFDs.

PDF File 243kb

Series 9500
Loop Reactor Axial Flow Pumps for Polyolefins Highly reliable pumps that go the distance between turnarounds. Advanced Hydraulic designs that provide increased production for a fixed capital cost

PDF File 2.0Mb

Series 9000
Axial Flow circulation pumps
For evaporators, crystallizers and other high flow - low head chemical and process applications.

PDF File 1.9Mb

Series 5100 Submersible
Patented Submersible Pumps of the True Slurry Design that provide extended life, continuous in air operation and run dry capabilities.

Zero-emission Slurry Pump
For Highly Abrasive Chemical Slurries. Patent pending design with anti-friction bearings and high shaft stiffness (L³/D⁴ less than 50) for high reliability. Retrofits into existing wet ends, lowering both installed cost and maintenance cost.

PDF File 413kb

Cryogenic Pumps
For liquid Oxygen and Liquid Nitrogen high head or high flow industrial applications

PDF File 1.0Mb

Loop Reactor Pump Up-Grades
Polyolefin axial reactor pumps with advanced propeller designs for increasing production rates.

PDF File 471kb

Axial Flow Pump Up-Grades
For Crystallizers and Evaporators Flows to 34,000 M3/hr, heads to over 70 meters and a full range of material and sealing options.
PDF File 492kb

System II Cryogenic Pump Up-Grade Packages
Increase air separation plant profitability by improving the reliability and safety of existing liquid oxygen and liquid nitrogen pumps.

PDF File 438kb

Toxic Liquid Pump Up-Grades
Improve the reliability and safety of tank mounted multistage chlorine and phosgene pump. Low NPSHR hydraulic designs reduce tank inventory. Heads to 244 meters
PDF File 514kb

Improve FCC Unit Profitability -
Bottoms System Upgrades
Improving FCC Unit operation through better use of capacity, higher conversion rates and lower maintenance cost.

PDF File 284

Solving Sludge Transfer Problems -
at a Waste-to-Energy Facility
Installation of a Series 5100 Submersible Pump in Waste-to-Energy Plant settling pond saves the facility over $15,000 in annual operating costs.

PDF File 2577kb